ASSEMBLY INSTRUCTIONS (THREE CHEATER SOFA) BEFORE YOU START ASSEMBLING YOUR FURNITURE: ® CHECK THAT YOU HAVE ALL THE Topees LISTED ON THE LEFT HAND Wm LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE. \attach sofa wadi (C) to the left hand side of sofa bass (8). Allen the bait brackets of bath (B) cnd {C) In the position shown In the hologram above.
ASSEMBLY INSTRUCTIONS (DOUBLE SOFA) BEFORE YOU START ASSEMBLING YOUR FURNITURE: m CHECK THAT YOU HAVE ALL THE PIECES LISTED ON THE LEFT HAND SIDE. B LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE. Attach soc side 3] to tha right hand aide of sofa base (B). Allen the bolt brackets of both (C) and (B) In the position shown In the diagram cove.
ASSEMBLY INSTRUCTIONS (SINGLE SOFA) BEFORE YOU START ASSEMBLING YOUR FURNITURE: Wm CHECK THAT YOU HAVE ALL THE PIECES LISTED ON THE LEFT HAND SIDE. Bm LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE. 12 12 12 11120 || LJ) TIM m| 9 1. Attach one of sofa side (A) to the left hand side of sofa base (C). Allen the bolt brackets of both (A) eng (C) In the positional shown In the diagram cove.
3. Attach remaining sofa side (A) to the complete the single sofa. Allen bolt rockets with those of (B) and C) For ester of the connecting bolt. brackets, assert Salt through a washer through the brackets and Secure win o mit F). Loosely ‘Onion with the Allen key (6) and spanner (1) until ol the baits hove, been put In place. Then go over each bolt and fully tighten.
ASSEMBLY INSTRUCTIONS (TABLE) BEFORE YOU START ASSEMBLING YOUR 8 CHECK THAT YOU HAVE ALL THE PIECES LISTED ON THE LEFT HAND SIDE. MW LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE. All Hires Tm] mM FURNITURE: Attach both tole the toss top (A) — endearing that ine holes In the center of the table legs face inwards. Align the screw brackets of the table logs (8) with the holes In the base of the table top (A) oa demonstrated In he Image cove.
ASSEMBLY INSTRUCTIONS (SIDE TABLE) BEFORE YOU START ASSEMBLING YOUR FURNITURE: Wm CHECK THAT YOU HAVE ALL THE PIECES LISTED ON THE LEFT HAND SIDE. HW LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE. |Tm|m 1 Om) Ser, Attach left plectra) and right plectra) to the bottom the bolt brackets of A, BI and B2 in the position shown in the diagram above.
3. Align the bolt brackets the position shown in the diagram above. For each of the connecting bolt brackets, insert long bolt( E) into the brackets with the Allen key(f). Fully tighten cache bolts after all bolts are inserted in the brackets, 4, Attach top piece(D) to the back piecemeal. Place the plastic washer (I) in the position shown. Insert long bolt( B) anti the brackets with the Allen key(H).