Installation guide

7
Weatherproof IR Color Day/Night Cameras
section 3: aiming the camera
section 3
Aiming the Camera
1. Connect the video cable from the camera to a test monitor or to a
video input on the DVR.
2. Connect the DC12V adapter to the camera.
3. Loosen the pan and tilt set screws on the camera mounting
bracket until the camera direction can adjusted. Do not remove the
set screws.
Camera aiming
4. While observing the video from the camera, aim the camera at
your target area.
5. Tighten the set screws to lock the camera in place.
CFC6042_43_CM.indd 7 2/9/2010 3:24:22 PM