Installation guide

12
www.scdlink.com
section 6: troubleshooting
3. The picture has interference.
a. The camera may be close to a high voltage source,
such as a power generator.
b. The BNC cable is not terminated properly.
c. The video cables are not connected properly.
4. The camera doesn’t operate at night.
a. Your cable run may be too long and you are experiencing a
drop in voltage.
CAUTION

This camera is a precision instrument and when
treated with care, will provide years of satisfactory
performance. If a problem does occur, do not open the
camera to make repairs. Servicing should always be
referred to your supplier.
CFC6042_43_CM.indd 12 2/9/2010 3:24:22 PM