Instruction manual

Clear-Com
CS-222 2-Channel
Main
Station
Shipping
IQ Manufacturer
f
lr
Repair
j l
aimmnt
All
shipments of Clear-Com equipment
must be prepaid via
United
Parcel Service or the
best available shipper. The equipment
should be
shipped in the original packing
container; however, it the
original con-
tainer is not available,
use a suitable
container that is rigid
and of ade-
quate
size: if a substitute container
is used, the equipment should
be
wrapped in paper and
surrounded with at least four
inches of excelsior or
similar shock-absorbing
material. A detailed
description of the problem
or work to be done
should be included. All shipments
should be directed
to the
attention of the Customer
Service Department and must
include
the Return Authorization
Number.
Upon completion
of repairs, equipment will be
returned collect via United
Parcel Service or other specified
shipper.
NOTICE ABOUT
SPECIFICATIONS
Performance specifications
included in this manual
are design-center
specifications and
are included for customer
guidance and
to facilitate
system
installation.
Actual operating
performance
may vary.
BEFORE YOU BEGIN ...
To get the
most out of the CS-222 Main
Station, read this manual
carefully.
It will answer questions
you might have about the operation
and service of the components
in the system. Included
is a Troubleshoot-
ing Section
that provides causes and possible
solutions to problems you
might have
with system and component
operation. Clear-Com's Cus-
tomer Service Department
is available to answer questions
not covered
in this manual.
It is assumed you are familiar
with the operation of basic
intercom
systems. If you
are not, it is important to read
the section titled "The
Clear-Com
Concept".
11/90 Rev. 1.0
Page 3