Specifications

Quintech Electronics and Communications Inc.
SRX Series Switching System Rev. A
10
4.2.1.2 Upgrading the SRX’s Firmware
Pressing 2 from the Configuration Menu displays the Load Firmware Screen. The Load
Firmware Screen enables you to upgrade the internal firmware level of the SRX unit. Pressing
F1 will put the controller in a special firmware download mode. The new firmware can then be
downloaded via the serial port. This process requires the Rabbit Field Utility (RFU) v 2.25 to be
executed on the PC from which the firmware is being transferred. Once the RFU shows that the
process is complete, the SRX must be power cycled to return to normal operation.
Press F1 to set Firmware download
“Control In” as F4=Exit
Load Firmware Screen
4.2.2 Configuring Interface Options
The Interface Options Menu allows you to configure either serial communication or Ethernet
settings.
1. Serial
2. Ethernet F4=Exit
Interface Options Menu