Specifications

Quintech Electronics and Communications Inc.
SRX Series Switching System Rev. A
12
Mode
The Mode Screen enables you to specify whether an RS-232, RS-485, or RS-422 serial interface
will be used to control the serial communications.
Mode: RS232 2=RS485 3=RS422
1=RS232 F4=Exit
Mode Screen
Terminate RS485
The Terminate RS485 Screen allows you to enable or disable termination on the serial port.
Only one device at the end of an RS485 cable should have termination enabled.
1. Control In: Off F1=On F2=Off
2. Remote Ports: Off F4=Exit
Terminate RS485 Screen