Specifications

Quintech Electronics and Communications Inc. Protocol Version 2.15 19
SRX Series Protocol
DESIGNS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE  2002 QUINTECH INC. ALL RIGHTS RESERVED.
i: Improper Data
This reply is sent if an improper number of data bytes are contained in the protocol wrapper.
For example, if an “S” command is sent with only an output number and no input number. This
error will also be sent for any command that contains too many or too few bytes, even if the
command does not have any data bytes.
Negative response sent:
15 XX XX 69 03 XX
NAK ADR ADR i ETX CHK
d: Data out of Range
This message will be sent if the data bytes sent are outside the parameters of your matrix. If
the SRX is polled for the status of output 17 and you only have 16 outputs, you will receive
this message.
Negative response sent:
15 XX XX 64 03 XX
NAK ADR ADR d ETX CHK