Installation guide

© 2001 Directed Electronics, Inc. Vista, CA 3
what is included
Shock Sensor
Sensitivity
Adjustment
H1 Primary
Harness Port
(14-Pin Connector)
White
LED Port
(2-Pin Connector)
Blue Valet
Switch Port
(2-Pin Connector)
■ The control module (see diagram)
■ Two 470T Series remote transmitters
■ Primary harness
■ A plug-in status LED
■ A plug-in Valet
®
switch
■ An on-board shock sensor
■ A back-up battery siren
■ Two back-up battery siren keys
■ A mercury tilt switch (for motorcycle installations)
Antenna