Installation guide

©
2002 Directed Electronics, Inc. 15
Transmitter Configurations
The transmitters can be programmed with the standard or single button arm/disarm configurations
by using the Auto Learn functions in the Transmitter/Receiver Learn Routine.
Standard Configuration
A remote that uses the standard configuration operates similarly to many factory keyless entry
remotes. A standard configuration transmitter allows arming, disarming, and Panic Mode activation
with separate buttons. When programmed for standard configuration using the Channel 7 Auto-
learn configuration, the transmitter buttons are assigned to the following functions:
operates Arm only
operates Disarm only
operates Channel 2 and Silent Mode
operates Panic only
and operate Channel 3
Single Button Arm/Disarm Configuration
When programmed for single button arm/disarm configuration using the Channel 8 Auto-learn
configuration, the transmitter buttons are assigned to the following functions:
operates Arm/Disarm/Panic
operates Channel 2 and Silent Mode
and operate Channel 3
Rapid Resume Logic
Rapid Resume Logic ensures that the when the system is powered up it will return to the same state
it was in when power is disconnected. For a full description of Rapid Resume Logic refer to the
owner's manual.