Technical information

SCI to SPI Peripheral Communication in V850ES Microcontrollers

2.8 Demonstration Platform

A demonstration platform was chosen from the NEC development tools available at the time when

this document was prepared. In some cases users may be able to duplicate the same hardware by

using standard off-the-shelf components along with the NEC MCU of interest.

2.8.1 Resources

To demonstrate the program, the following resources have been used:

• M-V850ES-KJ1 micro-board, with µPD70F3318Y (V850ES/KJ1+) 32-bit MCU mounted

• M-Station II Evaluation System, using M-Station II resources:

− 7-Segment LEDs LED1 and LED2

− Pushbutton switches SW2 and SW3

• Temperature Sensor MAX6627, mounted on M-Station II

• Remote diode-connected transistor as temperature probe

• Temperature sensor DS1722, mounted on the M-Station II

For details on the hardware listed above, please refer to the appropriate user’s manual, available

from NEC Electronics America upon request. For details on the MAX6627 and DS1722 devices,

please refer to the manufacturers’ data sheets.