Operating instructions

N400A 3/01

SUPER-BRIGHT STATUS LED, 2-PIN WHITE PLUG

The super bright LED operates at 2V DC. Make sure the LED wires are not shorted to ground as the LED will be

damaged. The LED indicates when a Car★Com

™

command has been received. The LED fits into a

/32-inch mount-

ing hole. When mounting the LED, be sure to check for clearance prior to drilling the mounting hole.

When using the Model 400 with a compatible DEI system it is not necessary to connect all of the output wires

of the 12-pin main harness; however, the RED (H1/11) power input and BLACK (H1/8) chassis ground input must

be connected.

______

*NOTE: This wire is not used unless utilizing the Dealer Lot Protection Program.

RED/WHITE (-) 200 mA CHANNEL 2 OUTPUT

RED (+) CONSTANT POWER INPUT

BROWN (-) HORN HONK OUTPUT

YELLOW NO FUNCTION

BLACK (-) CHASSIS GROUND INPUT

VIOLET NO FUNCTION

BLUE* DEALER/USER WIRE

GREEN NO FUNCTION

BLACK/WHITE NO FUNCTION

WHITE/BLUE (-) 200 mA CHANNEL 3 OUTPUT

WHITE (-) PARKING LIGHT OUTPUT

ORANGE (-) 500 mA ARMED OUTPUT

H1/1

H1/2

H1/3

H1/4

H1/5

H1/6

H1/7

H1/8

H1/9

H1/10

H1/11

H1/12

Main Harness (H1), 12-Pin Connector