Operating instructions

9
N400A 3/01
© 2001 Directed Electronics, Inc.
TYPE D: AFTER-MARKET ACTUATORS
In order for this system to control one or more after-market actuators, a 451M or two relays (optional) are
needed.
Vehicles without factory power door locks require the installation of one actuator per door. This requires
mounting the door lock actuator inside the door. Other vehicles may only require that one actuator be installed
in the driver's door if all door locks are operated when the driver's lock is used. This type of installation is
required to operate factory lock systems in Volvo (except 850), SAAB, and most Mazda, Isuzu and Subaru models.
The fuse used on 12-volt inputs should be 7.5A per motor installed in the vehicle.