Instruction manual

Instruction Manual
D200354X012
4200 Transmitters
July 2013
35
Figure 14. Housing Assembly for Fisher 4211 or 4221 Transmitter without Position Switches
49A7891‐M
APPLY LUBRICANT OR SEALANT
68
Parts List
Note
Part numbers are shown for recommended spares only. For part
numbers not shown, contact your Emerson Process Management sales
office.
Transmitter Common Parts
(Figures 11 and 14)
Key Description Part Number
1 Housing, aluminum
2 Cap, aluminum (2 req'd)
3* Pot/bushing Assembly
4210, 4211 27B6208X012
4212 27B6208X042
4215 27B6208X022
4220, 4221 27B6208X032
4222 27B6208X052
4 Wire Assembly
4210, 4212, 4215, 4220, 4222 only (6 req'd)
6 Machine Screw, SST
4211, 4221 (3 req'd)
7 Split Washer, (4211, 4221 only),
stainless steel (2 req'd)
Key Description Part Number
9 Wire (red), 18 AWG
50.8 mm (2 inches) 4211, 4221
146 mm (5.75 inches) 4210, 4220,
4215, 4212, and 4222,
10 Wire (black), 18 AWG (Not used on 4212, 4222)
50.8 mm (2 inches) 4211, 4221
146 mm (5.75 inches) 4210, 4220, 4215
11 Barrier Strip (4211, 4221 only), plastic
12 Machine Screw (4211, 4221 only),
stainless steel (2 req'd)
13 Barrier Marker Strip (4211, 4221 only)
14* O‐Ring, nitrile (2 req'd) T1205106562
15* O‐Ring Bushing, Nitrile 10A8931X012
16 Solder Lug, (4211, 4221 only)
Tin pl brass (2 req'd)
17 Insulating Washer, PTFE (2 req'd) (not shown)
18 Self Tapping Screw, pl steel (2 req'd)
19 RFI Filter
4212, 4222 (1 req'd)
4210, 4211, 4215, 4220, 4221 (2 req'd)
20 Pipe Plug (4211, 4221 only), steel
35 Machine Screw, pl steel (4212, 4222 only)
43* Field Circuit Printed Wiring Board Assembly 39A6195X012
45 Transmitter Printed Wiring Board Assembly
4210, 4220
4211, 4221
4212, 4222
4215
48 Lithium grease (not furnished with transmitter)
*Recommended spare parts