Instruction manual
Instruction Manual
D200354X012
4200 Transmitters
July 2013
36
Key Description
49 Thread Locking Adhesive (medium strength)
(not furnished with transmitter)
50 Anti‐seize lubricant (not furnished with transmitter)
55 Pipe Plug (not shown), pl steel
56 Machine Screw (not shown), pl steel
4212, 4222 only
58 Wire Retainer, pl steel, (2 req'd)
65 Nameplate
67 2‐Wire Connector
68 Identification label (see figure 5)
106 Set screws, hex socket, 18-8 SST (2 req'd)
Mounting Parts for Sliding‐Stem
Actuators
Note
Contact your Emerson Process Management sales office for 4200
mounting FS Numbers.
Parts for Mounting the Transmitter on 585C
size 60 thru 130 (470 and 471) Actuator
(figure 15)
Key Description
21 Mounting plate, steel
Size 130
All other sizes
22 Yoke Spacer, steel (2 req'd)
Size 30, 45 only
23 Cap Screw, zn pl steel (2 req'd)
Size 30, 45
Size 40, 46 thru 130
24 Washer, pl steel (2 req'd)
25 Operating Arm, pl steel
26 Cap Screw, pl steel
27 Square Nut, pl steel
29 Torsional Spring, zn pl steel
30 Lever Assembly
Size 30 thru 130
w/ 54 mm (2.125 inch) max travel
Size 80 thru 130 w/ 54 thru 105 mm
(2.125 thru 4.125 inch) max travel
31 Shoulder Screw, stainless steel
32 Cap Screw, pl steel (2 req'd)
Key Description
33 Stem Bracket, zn pl steel
Size 30 thru 130
with 54 mm (2.125 inch) max travel
Size 80 thru 130 w/ 54 thru 105 mm
(2.125 thru 4.125 inch) max travel
34 Stem Mounting Bracket, zn pl steel
Size 30, 40, 45, 63, 64
Size 46, 60, 68, 80, 86, 130
Size 100
35 Cap Screw, zn pl steel (2 req'd)
Size 30, 45
Size 40
Size 64
Size 68, 80
Size 100
36 Sleeve, acetal
37 Cap Screw, steel (2 req'd)
38 Stem Washer (2 req'd)
Size 30 thru 46, pl steel
Size 60 thru 64, zn pl steel
Size 68 thru 130, zn pl steel
39 Stem Spacer (2 req'd)
Size 30, 45, steel
Size 40, steel
Size 64, steel
Size 68, 80, zn pl steel
Size 100, steel
48 Lithium grease (not furnished with transmitter)
49 Thread Locking Adhesive (medium strength)
(not furnished with transmitter)
51 Thread Locking Adhesive (mild strength)
(not furnished with transmitter)
Parts for Mounting the Transmitter on
585C, size 60 thru 130 (470‐7 and 471‐7)
Actuator (figure 15)
21 Mounting plate, steel
23 Cap Screw, zn pl steel (2 req'd)
24 Washer, pl steel (2 req'd)
25 Operating Arm, pl steel
26 Cap Screw, pl steel
27 Square Nut, pl steel
29 Torsional Spring, zn pl steel
30 Lever Assembly
31 Shoulder Screw, heat treated stainless steel
32 Cap Screw, pl steel (2 req'd)
33 Stem Bracket, zn pl steel
34 Stem Mounting Bracket, zn pl steel
Size 40 thru 45, 64
Size 60
35 Cap Screw, zn pl steel (2 req'd)
Size 40
Size 45
Size 64