Installation guide

Once a feature is programmed:

• Other features can be programmed within the same menu.

• Another menu can be selected.

• The learn routine can be exited if programming is complete.

To access another feature in the same menu:

1. Press and release the Valet

/Program switch the number of times necessary to advance from the fea-

ture you just programmed to the next one you want to program.

2. Then press the Valet

/Program switch once more and hold it.

For example, if you just programmed the third feature in the menu and you would like to program the seventh feature

in the menu, you would press and release the Valet

/Program switch four times and then press it once more and

hold it. The siren would chirp seven times to confirm access to the seventh feature.

To select another menu:

1. Press and hold the Valet

/Program switch.

2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating which

menu has been accessed.

For instance, if you just programmed some features in Menu #1 (Basic Features) and you desire to program a

feature in Menu #2, you press and hold the Valet

/Program button. After three seconds, the siren chirps twice indi-

cating access to Menu #2.

To exit the System Features Learn Routine, do one of the following:

1. Close the open door.

2. Turn the ignition on.

3. No activity for longer than 15 seconds.

4. Press the Valet

/Program switch too many times.