Owner`s manual

and the vehicle should start. If it does not, you may have waited too

long. Turn the ignition off and try again.

valet

mode

Valet

Mode prevents your system from arming and triggering either

automatically or with the transmitter. In Valet

Mode, all convenience

functions (door locks, trunk release, etc.) will remain operational. This

feature is useful when washing or servicing your vehicle.

To enter or exit Valet

Mode with the integrated LED/Valet

switch:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the integrated

LED/Valet

switch within 10 sec-

onds.

The status LED will light steadily if you are entering Valet

Mode and

will turn off if you are exiting Valet

Mode.

DRW-35

Important: The Valet

switch can be programmed to respond

to 1-5 presses for the disarm function. The factory default set-

ting is one pulse.