Owner`s manual

remote valet

You can also enter or exit Valet

Mode using your remote transmitter:

1. Open any vehicle door.

2. Press .

3. Press .

4. Press again.

The status LED will light solid if you are entering Valet

Mode and will

turn off if you are exiting Valet

Mode.

silent mode

™

Use Silent Mode

™

to temporarily turn off the arming or disarming

chirps by briefly pressing before either arming or disarming. The

confirmation chirp(s) will be eliminated for that one operation only. To

permanently turn off the arming and disarming chirps, see program-

ming options.

panic mode

If you are threatened in or near your vehicle, pressing on your

remote transmitter for 1.5 seconds will trigger your alarm system and

attract attention. The horn will sound and the parking lights will flash

for 30 seconds. To stop the Panic Mode at any time, press ,

, or .

note: The Warn Away

Response to lighter impacts is

bypassed if the system is armed using the Silent Mode

™

. This

ensures that the horn does not chirp in an environment where

you don’t want chirps to be emitted. The system is still capa-

ble of being triggered by heavier impacts; only the Warn

Away

Response generated by light impacts is bypassed.