Owner`s manual

Circuitry

has bypassed that zone. In both cases, the pattern of the

flashing status LED will indicate which zone was triggered (see Table of

Zones). The system retains this information in its memory and will con-

tinue to chirp four or five times each time the system is disarmed, until

the next time the ignition is turned on.

table of zones

A zone is represented by the number of LED flashes used by the system

to identify a particular type of input. Standard input assignments are

listed below.

ZONE

(Number

LED Flashes) DESCRIPTION

Instant trigger - often used

for hood/trunk pin switches

2 Instant trigger - a heavier impact

detected by the shock sensor

3 Door switch trigger

4 Instant trigger—for optional sensors

5 Ignition trigger