Owner`s manual

15
programming options
Programming options control your system’s normal, operational set-up.
Most options do not require additional parts, but some may require
installation labor.
The following is a list of the program settings, with the factory settings
in bold:
z
Active Arming or Passive Arming (automatic arming 30 sec-
onds after the last door is closed).
z
Arming and disarming confirmation horn chirps, On or Off.
z
Ignition controlled door lock feature, On or Off. With this
feature on, the doors will lock three seconds after the igni-
tion key is turned on, and unlock when the ignition is turned
off. The system also prevents the doors from locking when
the ignition is turned on while any vehicle door is open.
z
Active Door Locking (only when arming with the transmit-
ter) or Passive Door Locking (with Passive Arming).
z
Valet
®
Switch Pulse Count: The number of times the Valet
®
switch needs to be pressed to disarm the system. One to five
pulses can be programmed, with the default setting being
one pulse.