Owner`s manual

programming settings

The following procedure outlines the steps required to change the fea-

ture settings detailed in the programming options section.

To enter programming mode:

1. Open the drivers door:

2. Turn the ignition On, then Off:

3. Select a feature: Press and release the

integrated LED/Valet

switch the number of

times corresponding to the step you wish to

change (see systems features menu). For

example, to access passive arming, press and release once.

Then press the button once more and HOLD it. The horn will

chirp once (equal to the step you have accessed). Continue

to hold down the switch and proceed to step 4.

4. Program the feature: While holding

the integrated LED/Valet

switch, you can

toggle the selected feature on and off using

the remote transmitter. Pressing the arm

button that locks the doors will select

the one chirp setting. Pressing the disarm button will

select the two chirp setting. Release the integrated

LED/Valet

switch.