Owner`s manual

18
once a feature is programmed
z
Other features can be programmed.
z
The Programming Mode can be exited if programming is
complete.
to access another feature
Press and release the LED/Valet
®
switch the number of times necessary
to advance from the feature you just programmed to the next one you
want to program. Then press the integrated LED/Valet
®
switch once
more and hold it. For example, if you just programmed the third fea-
ture and you would like to program the seventh feature in the menu,
you would: Press and release the integrated LED/Valet
®
switch four
times. Then press it once more and hold it. The horn would chirp seven
times to confirm access to the seventh feature.
to exit the programming mode
Do one of the following:
1. Close the open door.
2. Turn the ignition on.
3. No activity for longer than 15 seconds.