Owner`s manual

feature descriptions

1. ACTIVE/PASSIVE ARMING: When active arming is selected, the sys-

tem will only arm when the transmitter is used. When set to passive,

the system will arm automatically 30 seconds after the last door is

closed. To alert the consumer of passive arming, the horn will chirp 20

seconds after the door is closed. This provides the consumer with an

audible warning prior to the system actually arming. At the 30 second

mark, the system will arm but the horn will not chirp.

2. AUDIBLE ARM/DISARM CONFIRMATION ON/OFF: This feature

controls the chirps that confirm the arming and disarming of the sys-

tem. In the ON setting (default) the horn will provide audible confir-

mation when arming and disarming the system. If programmed to the

OFF position no horn chirps will be heard when arming and disarming.

3. IGNITION-CONTROLLED LOCKING ON/OFF: When turned on, the

vehicle doors will lock three seconds after the ignition is turned on.

4. IGNITION-CONTROLLED UNLOCKING ON/OFF: When turned on,

the vehicle doors will unlock when the ignition is turned off.

5. ACTIVE/PASSIVE LOCKING: If passive arming is selected in step 1,

then the system can be programmed to either lock the doors when

passive arming occurs, or only lock the doors when the system is armed

via the transmitter. Active locking means the system will not lock the

doors when it passively arms. Passive locking means that the system

will lock the doors when it passively arms.

nnoottee::

Remember, when passive arming is selected, the unit

will chirp 20 seconds after the last door is closed. The sys-

tem does not actually arm or lock the doors until 30 seconds

after the door has been closed.