Owner`s manual

6. DOOR LOCK PULSE DURATION: Some vehicles require longer lock

and unlock pulses to operate the door lock vacuum pump.

Programming the system to provide 3.5 second pulses, will accommo-

date the door lock interface in these vehicles. The default setting is 0.8

second door lock pulses.

7. DOUBLE PULSE UNLOCK ON/OFF: Some vehicles require two puls-

es on a single wire to unlock the doors. When the double pulse unlock

feature is turned on, the unlock relay will provide two pulses instead of

a single pulse.

8. DOOR TRIGGER ERROR CHIRP ON/OFF: With the door trigger

error chirp programmed off, the system will not report an invalid zone

on arming when the door trigger wire is active. This eliminates the

extra chirps that occur when interfacing with vehicles that have excep-

tionally long dome light delay circuits.

9. IGNITION-CONTROLLED DOMELIGHT ON/OFF: If turned on, the

system will turn on the domelight for 60 seconds when the ignition is

turned off.

10. VALET

PULSE COUNT 1-5 PULSES: The system can be pro-

grammed to count the number presses of the integrated LED/Valet

switch before disarming the security system. The factory setting is one

pulse. The unit can be set for 2 to 5 pulses.

11. CHANNEL 3 VALIDITY/LATCHED/LATCHED RESET WITH IGNI-

TION/30 SECOND TIMED/SECOND UNLOCK OUTPUT/DELAYED

ACCESSORY OUTPUT: Channel 3 can be programmed for these out-

put configurations. The unit is set to the default validity output.