Owner`s manual

2525
Quick Reference Operating Card
To arm the system using your transmitter
■ Press for one second to arm the system and lock the doors (if
the door locks are connected to the system). When the system arms,
you will hear one chirp and the parking lights will flash once.
To disarm the system using your transmitter
■ Press to disarm the system and unlock the doors (if the door
locks are connected to the system). When the system disarms, you will
hear two chirps and the parking lights will flash twice.
Disarming without a transmitter
■ To disarm without a transmitter, you must have the vehicle’s ignition
key and know where the integrated LED/Valet® switch is. Turn On the
ignition key. Press the integrated LED/Valet® switch the pre-pro-
grammed number of times within 15 seconds. If the system does not
disarm, you may have waited too long; turn the ignition off and repeat
the process.
To enter or exit Valet
®
Mode
■ To enter or exit Valet® Mode, turn the ignition key on and then off.
Then press and release the integrated LED/Valet® switch within 10 sec-
onds. The status LED will light steadily if you are entering Valet® Mode
and will turn off if you are exiting Valet® Mode.
To activate Panic Mode
■ Press and hold for 1.5 seconds.
To exit Panic Mode
■ Press , , or .
To activate Silent
®
Mode
■ Press briefly before arming or disarming. The confirmation
chirp(s) will be eliminated for that one operation only.
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂✂
✂✂