Owner`s manual

using your system

The buttons described in all instructions in this manual correspond to

the standard configuration, unless otherwise specified.

manual (active) arming

The factory default is active arming. In this mode you can activate, or

arm the security system and lock your vehicle’s doors (if connected) by

pressing for one second. When the system arms, you will hear

the horn chirp and the parking lights will flash once. Once armed, the

status LED will flash twice per second to indicate that the system is

actively protecting your vehicle. If you hear a second chirp after arming

and notice that the status LED is flashing in a grouped pattern, this sig-

nals Bypass Notification, which is described in the Diagnostics section

of this manual.

automatic (passive) arming

The system can also be programmed to arm itself automatically 30 sec-

onds after the ignition is turned off and the last vehicle door has been

closed (called Passive Arming). Once the 30-second countdown period

initiates, the status LED will flash twice as fast as it does when the sys-

tem is armed. After 20 seconds, the horn will chirp once to warn that

the system has only 10 seconds remaining prior to arming. The system

is not actually armed at this point. The system arms itself at the 30-sec-

ond mark. At this point, the vehicle doors will also lock (if programmed

for Passive Locking) and the status LED will begin flashing twice per

second to indicate armed status. If Passive Locking is activated, care

must be taken to prevent the keys from being locked in the vehicle.