Installation guide

features #2 menu

Default settings are shown in bold.

transmitter learn routine

1. Key. Turn the key to the ON position.

2. Choose. Within 5 seconds, press and release the integrated LED/Valet

switch the

number of times corresponding to the desired channel listed below. Once you

have selected the channel, press the switch once more and HOLD it. The LED will

flash and the horn will honk ( if connected) to confirm the selected channel. Do not

release the integrated LED/Valet

switch.

3. Transmit. While holding the integrated LED/Valet

switch, press the button from

the transmitter that you wish to assign to the selected channel. The unit will chirp

indicating successful programming. It is not possible to teach a transmitter button

to the system more than once.

Feature

Step

Lock Button (one chirp) Unlock Button (two chirps)

1 Ignition-Controlled Locking ON Ignition-Controlled Locking OFF

2 Ignition-Controlled UnLocking ON Ignition-Controlled Unlocking OFF

3 Active Locking Passive Locking

4 Door Lock Pulse Duration–0.8 sec. Door Lock Pulse Duration–3.5 sec.

5 Single Unlock Pulse Double Unlock Pulse

6 Channel 3: Validity Channel 3: Second Unlock

7 Code Hopping ON Code Hopping OFF