Installation guide

© 2003 directed electronics, inc.
27
4. Release. Once the code is learned, the integrated LED/Valet
®
switch can be
released.
master dealer remotes
A master dealer remote can be programmed into the system for demonstration pur-
poses. Generally, each salesman would carry a remote that would operate all the cars
on the lot equipped with this system. The dealer remotes are binary transmitters that
are detuned slightly in order to limit transmitting range. The dealer remote can be
taught to the system by following the Transmitter Learn Routine.
When installing the system, it is possible to preset all of the operation settings using
the master dealer remote. However, when the system is operated using the master
dealer remote, a special set of dealer default settings are followed. The dealer default
settings are used to ensure that every vehicle equipped with this system is protected at
all times. Only the settings listed below are affected. When using a master dealer
remote, the system operates as follows:
z
Passive arming
Channel Number Function Wire Color
1 Auto learn standard
configuration
2 Arm/Disarm/Panic
3 Channel 2
4 Channel 3 WHITE/BLUE
5 Channel 4 VIOLET/BLACK
6 Arm only
7 Disarm only
8 Panic only
9 Delete all transmitters