Installation guide

indicator and the ECM. (See the following diagram for details.)

H2/2 LIGHT GREEN/BLACK (-) Factory Disarm Output

This wire sends a negative pulse every time the remote start is activated. This can be used to pulse

the disarm wire of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to the

disarm wire as shown in the diagrams below. This wire can also be used as a special accessory output.

(See Feature Descriptions section of this guide.)

RReellaayy ffoorr NNeeggaattiivvee ((--)) DDiissaarrmm WWiirree RReellaayy ffoorr PPoossiittiivvee ((++)) DDiissaarrmm WWiirree

H2/3 VIOLET/BLACK 200 mA (-) channel 4 output

This wire provides a (-) 200mA output whenever the transmitter button(s) controlling Channel 4

is pressed. This output can be programmed to provide the following types of outputs. (See the

Feature Menus section.)

2003

Directed Electronics, Inc.