Installation guide

Remote Start Harness (H3),
Wire Connection Guide
Remote Start Harness (H3) Wiring Diagram
___
___
___
___
___
___
Remote Start Harness Wire Descriptions
H3/1 BLUE Status Output
This wire supplies a 200mA output as soon as the module begins the remote start process. The H3/1
BLUE wire can also be used to rearm a factory anti-theft system when the remote start shuts down.
(See the Feature Descriptions section in this guide.)
NOTE: This wire can also be used to bypass optional sensors as described in the following diagram.
To bypass an optional sensor:
H3/2 BLUE/BLACK (-) Optional Third Ignition Output
SENSOR TRIGGER OUTPUT
SENSOR INPUT OF SYSTEM
(+) 12V FUSED
CUT
85
86
30
87
87A
DIA-141
H3/1 BLUE STATUS
OUTPUT
BLACK/WHITE (-) Nuetral Safety Switch Input
VIOLET/WHITE Tachometer Input Wire
BROWN (+) Brake Switch Shutdown Wire
GRAY (-) Hood Pinswitch Shutdown Wire
BLUE/BLACK (-) 200 mA Optional Third Ignition Output
BLUE (-) Status/Factory Security Rearm Output
1
2
3
4
5
6
16
©
2002 Directed Electronics, Inc.