Installation guide

©
2003 Directed Electronics, Inc. 37
24-Hour Timer Mode
To enter 24-hour Timer Mode, press and simultaneously. The remote control will produce
a melody and the clock indicator will appear on the remote’s LCD. Once in Timer Mode, the
system will remote start every 24 hours. Repeat this process to turn Timer Mode off.
Diagnostics
The system’s microprocessor monitors and reports all active and violated zones when arming and
disarming. LED flashes indicate the active or violated zone; siren chirps indicate system status.
Arm/Disarm Diagnostics
The number of siren chirps will indicate the status of the system when arming and disarming. For
information on which zone is active or has been violated refer to the Table of Zones.
System Status Chirps