Installation guide

38
©
2003 Directed Electronics, Inc.
Table of Zones
NOTE: The Warn Away® response does not report on the LED.
Long-Term Event History
The system stores the last two full triggers in memory. These are not erasable. Each time the unit
sees a full trigger, the older of the two triggers in memory will be replaced by the new trigger. To
access long term event history:
1. With the ignition off, press and HOLD the Valet/Program switch.
2. Turn on the ignition.
3. Release the Valet/Program switch.
Zone DESCRIPTION LCD Icon
(LED Flashes)
1 Instant trigger - hood pinswitch Hood Open and Trigger Alert Icon
2
Instant trigger - a heavier impact Full Trigger Shock Sensor Icon
detected by the shock sensor
3
Door switch trigger Door Open and Trigger Alert Icon
4
Instant trigger - for optional sensors N/A
5 Ignition trigger N/A
Action Number of Chirps Description
Arm 1 System armed
Arm 1 (3 second delay), 1 System armed with Bypass Notification
Disarm 2 System disarmed
Disarm 4 System disarmed with Tamper Alert
Disarm 5 System disarmed NPC® active