User guide

Back to Contents Page
NDIS2 Driver Software: Broadcom 440X
10/100 Integrated Controller User Guide
Preinstallation Requirements
Installing the NDIS2 Driver Software for Use on MS-DOS Platforms
Preinstallation Requirements
Networking software that is appropriate to the operating system (such as Microsoft LAN Manager 2.2
for MS-DOS) must already be running on your computer.
Installing the NDIS2 Driver Software for Use on MS-
DOS Platforms
The NDIS2 driver software can be run from an MS-DOS startup disk using Microsoft Network Client 3.0
or from the hard disk using Microsoft LAN Manager 2.2.
Creating a Startup Disk to Run Microsoft Network Client
To perform this installation you must have the following items:
● Windows NT Server 4.0 CD-ROM
● A blank MS-DOS system disk (3.5" high-density floppy disk)
● Access to the Broadcom NDIS2 driver file (B44.dos). This file is located on the Installation CD.
NOTES:
● Windows NT Server 4.0 users. When running Setup for Microsoft Network Client
v3.0 for MS-DOS, click any network card from the list (NE2000 Compatible, for
example) to create the startup disk.
● After creating the startup disk, follow the instructions in Modifying the Startup Disk.
To create a startup disk