User guide

Back to Contents Page
DOS Diagnostics: Broadcom 440X 10/100
Integrated Controller User Guide
Introduction
Prerequisites
Diagnostic Test Descriptions
Introduction
B44UDIAG is a DOS based program that runs a series of diagnostic tests on the Broadcom 440X
10/100 Integrated Controller. If any test fails, the B44UDIAG program displays an error and exits to
DOS.
The following options are available:
Option Operation
-l file
Logs the data to a file.
-c num
Specifies the card to be tested.
-I num
Iteration number.
-t id
Disables tests.
-T id
Enables tests.
-r num
Input radix.
-lbm number of packets
Option to specify the number of packets in the MAC loopback test.
-lbp number of packets
Option to specify the number of packets in the PHY loopback test.
-lbh number of packets
Option to specify the number of packets in the 100BASE-T external
loopback test.
-lbt number of packets
Option to specify the number of packets in the 10BASE-T external
loopback test.
-elog file
Produces a log file with only error information.
-com value
Enables com port (Value 1..4) (internal use only).
-ppxe
Programs PXE from file.