User guide

5. Follow the on-screen instructions provided by the Hardware Update Wizard.
Viewing or Changing the Properties of the
Controller
To view or change the properties of the Broadcom Ethernet controller
1. In Control Panel, click or double-click Broadcom Control Suite 2.
2. Click the Advanced tab.
3. See
Advanced for a detailed description of the available properties as well as for instructions for
viewing and changing the value of a particular property.
Removing the Driver Software
1. In Control Panel, double-click Add or Remove Programs.
2. Click Broadcom 440X 10/100 Integrated Controller, and then click Change/Remove.
3. Select Remove, and then click Next.
4. Click OK.
Setting Power Management Options
You can set Power Management options to allow the operating system to turn off the controller to save
power or to allow the controller to wake up the computer. If the device is busy doing something
(servicing a call, for example), however, the operating system will not shut down the device. The
operating system attempts to shut down every possible device only when the computer attempts to go
into hibernation. To have the controller stay on at all times, do not click the Allow the computer to
turn off the device to save power check box.