Installation guide
36
© 2008 Directed Electronics. All rights reserved.
Step Function
2
Delete remotes: This feature erases all remotes from the memory of the security
system. This is useful in cases when a customer’s remote is lost or stolen.
Note: This does not reset the programmed features of the security system or
reset the Virtual Tach setting.
3
Reset Features: This resets features all of the security system to the factory
default settings.
Note: This feature does not delete the remotes from the security system or reset
the Virtual Tach setting.
4
Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on
the next remote start sequence the unit begins virtual tach initialization.
Note: The “Zap” feature on the Bitwriter does not reset the Virtual tach
setting.
4. Transmit. While holding the Valet/Program switch,
press the
A U X
button on the remote control. The unit chirps
to confirm that the code has been successfully pro-
grammed. It is not possible to teach a remote control
button to the system more than once.
2. Radious will be if not specied.
1. Tex ture is same as
3. Body color :
INJECT TOLERANCE SPEC.
*Tolerance please refer specication
of tolerance limits "c"
120~300
DIMENSION
30~120
UNDER 6
0.40 0.80
0.20
0.10
0.08
A
±
GRADE
6~30
B
±
0.40
0.20
0.16
2.00
C
±
0.40
0.80
0.30
DEI
NUTEK
FELIX
VICTO R
APPD BY
UNIT:
M/M
CODE
MATERIAL
FINISH
SCALE:
1:1
YG F
SHEET
DRN BY
CHK BY
11/20/07
OF
DATE
A4
TITLE
DEPTSIZE
REV .
1
REVISIONS
DESCRIPTION
CORPORAT ION
OLED IVU
94I0600
DRAWING NO
0
REV
DATE DRN.
94I0600
CASE P/N:IADGH0A1
KEY P/N:IKDEL0A0
36.32
11.50
10.44
%2'<0$7(5,$/+,+($7$%689
%/$&.
5. Release. Once the code is learned, the Valet/Program
switch can be released. You can advance from one
function step to another by releasing the Valet/Program
switch and tapping it to advance function steps and then
holding it.
Learn Routine is exited if:
The door is closed•
The ignition is turned off•
The program switch is pressed too many times•
More than 30 seconds elapses between steps•