Avital Model 5303 2-way remote Owner’s Guide Addendum © 2008 Directed Electronics, Vista, CA ADG5303L 2008-07
Contents Government Regulations................................................................................................................ 3 About this addendum.................................................................................................................... 4 Remote configuration..................................................................................................................... 4 LCD 2-way remote........................................................................
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
About this addendum This guide only includes information about using the Avital 5303’s LCD 2-way remote. For complete information about the 5303 Remote Start Security system, please consult the Owners Guide. Remote configuration ➤ LCD 2-way remote 4 5 6 7 8 9 3 2 1 31 30 29 28 10 27 11 26 25 12 24 13 23 14 22 15 21 20 16 17 4 19 18 © 2008 Directed Electronics. All rights reserved.
1 Vehicle Interior Temperature Indicator 2 Numeric Display 3 AM/PM Indicator 4 Alarm Clock Mode Indicator 5 Timer Function Indicator 6 Transmit Range Indicator 7 Transmission Indication 8 Vibrate/Beep Mode Indicator 9 Power Saver Mode Indicator 10 Remote Start Timer Mode Indicator 11 No Function 12 Vehicle Page Mode Indicator 13 Full Trigger Shock Sensor Indicator 14 Hood/Trunk Open or Trigger Indicator 15 Parking Light Indicator 16 Door Open or Trigger Indicator 17 Arm/Lock
➤ System maintenance The system requires no specific maintenance other than battery replacement for the remote. LCD 2-Way Remote Battery Replacement The 2-way remote is powered by a 1.5V AAA battery. The Battery indicator has three levels that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires replacement, the remote will generate a single notification chirp, and the Battery Level indicator will flash continuously.
LCD 2-way remote functions The remote buttons are used to send commands to the system. The descriptions below reflect the standard configuration for this system. The buttons can be custom configured for the user’s specific needs by the installer. ➤ Standard button configuration Button The System Arm/Lock and Multi-Level Security Arming functions are controlled by pressing this button. ������� Button The System Disarm/Unlock and High Security Disarm functions are controlled by pressing this button.
������� and ������� Buttons The numeric display toggles between the time of the day and the alarm clock when these buttons are pressed simultaneously. ������� and Buttons Press these buttons simultaneously to activate the parking timer. Each additional press will toggle through the available options (10 min., 20 min., 30 min., 1 hour, 1.5 hours, 2 hours, and off). ������� and Buttons When pressed simultaneously these buttons toggle between beep notification and vibrate notification.
The remote start timer mode icon indicates that the 24-hour Auto start feature is active. It automatically remote starts 24 hours from the time activated. The VRS mode icon has no function. The vehicle page mode icon displays when the alarm module is paging the remote. Page mode is activated when the valet switch in the vehicle is pressed and held for 4 seconds. The full trigger shock sensor icon indicates that the shock sensor has been triggered by a hard shock.
LCD 2-way button functions Function ������� Lamp On (10 sec) Button (s) Icon Audio ������� Power Saver Mode ������� + ������� + Beep/Vibrate Mode Time Adjust Mode (hour)** 4 Vibrations/ 1 Beep 2 beeps + for 5 secs.
LCD 2-way remote operation The remote start system operates at 434 MHz and incorporates Directed’s proprietary A.S.K. out-board two-way remote. The high frequency combined with Binary Data communication achieves superior range with two-way communication. ➤ Paging features The control module sends a page to the remote as confirmation of a received command, or alarm system status.
• • • Hood Trigger - Opening the hood will sound the siren, flash the lights for the programmed duration, and report Zone 1. Trunk Trigger - Opening the trunk (if connected) will instantly sound the siren and flash the lights for the programmed duration and report Zone 4. Ignition Trigger - If the ignition is turned on the siren will chirp for three seconds, then the siren will sound and the lights will flash for the programmed duration and report Zone 5.
The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology. Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world.
