Installation guide

17
© 2004 Directed Electronics, Inc.
HH11//88 WWHHIITTEE
(-) parking light flash output
See Finding the Wires You Need section of this guide for finding
the parking light wire. Once you have identified the correct wire,
strip a small portion of insulation off this wire and solder the
WHITE (H1/8) wire from the main connector to it and wrap
the connection with electrical tape.
rreellaayy wwiirreess ((hheeaavvyy gguuaaggee)) ddeessccrriippttiioonn
AA––PPUURRPPLLEE
(+) output to starter circuit
See Finding the Wires You Need section of this guide for finding
the starter wire. Reconnect both ends of the starter wire and
solder this PURPLE wire to the starter wires. Wrap the connec-
tion with electrical tape.