Installation guide

4
© 2004 Directed Electronics, Inc.
iinnssttaallllaattiioonn ppooiinnttss ttoo rreemmeemmbbeerr
before the installation
➤ Please read this entire installation guide before beginning the
installation. The installation of this remote start system
requires interfacing with many of the vehicle’s systems. Many
new vehicles use low-voltage or multiplexed systems that can
be damaged by low-resistance testing devices, such as test
lights and logic probes (computer safe test lights). Test all
circuits with a high-quality digital multi-meter before
making connections.
➤ Do not disconnect the battery if the vehicle has an anti-theft-
coded radio. If equipped with an air bag, avoid disconnecting
the battery if possible. Many airbag systems will display a
diagnostic code through their warning lights after they lose
power. Disconnecting the battery requires this code to be
erased, which can require a trip to the dealer.
➤ Remove the domelight fuse. This prevents accidentally
draining the battery.
➤ Roll down a window to avoid being locked out of the car.
after the installation
➤ Test all functions. The "Using Your System" section of the
Owner's Guide is very helpful when testing.
➤ Complete the vehicle
SSaaffeettyy CChheecckk
outlined in this manual
prior to the vehicle reassembly.
➜
➜