Operating instructions

Doc.No.: INTERM-120-240
Page 3 of 7
1. POWER INDICATING LED.
This LED indicates power is turn ON.
2. POWER SWITCH.
Pressing this switch to ON will make the power indicating LED ON and supply the power to
unit.
3. OUTPUT LEVEL INDICATORS.
These led indicates the output level of this amplifier. Be sure not to operate the unit with the
clip led on continuously (RED).
4. PROTECTION INDICATOR.
This led indicates the condition of the protection circuit. When the protection led is “ON” the
amplifier is not operating normally (overheating and limiting), please check the input/output
condition of the amplifier.
Handbook page
60/94