Operating instructions

Doc.No.: 96106-019-DE
Page 2 of 2
GENERAL DESCRIPTION.
The alarm panel SPA-1505 is a panel intended for flush mounting either separately or in
combination with the control unit SPA-1501. It is based on 144 mm standard module
height, 48 mm wide.
The alarm panel consists of 2 alarm buttons with integrated light indicators and a third
light indicator for a remote controlled alarm.
The alarm button indicators also have a remote control indication mode where they will
light with reduced strength.
Then the alarm is overridden by own activation it will light with full intensity.
Both alarm buttons have mechanical alternate functionality. When connected to the
SPA-1500 the termination will decide the priority of the alarm signal.
Phontech recommend the wiring indicated in the document 96106-019-EC.
This will make the priority according to IMO regulation
like this:
1. General Alarm.
2. Fire alarm (remotely controlled from an automatic fire and gas system).
3. Alarm 2 (customer requirements/delivered upon request).
All alarm setting outputs and indicator inputs are based on 24 VDC supply with closing
contacts to 0V.
Handbook page
83/94