Operating instructions

l Internal check of the electronics
l indication of the instrument type, firmware version as well
as the instrument TAG (instrument name)
l the output signals jump briefly to the set fault current
Then the current measured values will be displayed and
outputted.
As requested, the measured value display shows the
individual measurement loops separately or in a joint overview.
The respective digital display value, the measurement loop
designation (meas. loop TAG) and the unit are shown. With the
separate presentation, an analogue bar graph is also display-
ed and the measured values appear in bigger font size.
32.6
%
TAG-No.1
■
By pushing [OK] you move from the measured value indication
to the main menu.
▶ Device settings
Measurement loops
Display
Diagnostics
Service
Info
With the initial setup, you should select all submenu items of
"Device settings" and enter the correct settings.
à Select the menu item Device settings with [–>] and confirm
with [OK].
Under the menu item "Device settings", you can select the
requested application. For all level, gauge and differential
measurements, the application "Standard" is correct.
If an interface measurement should be carried out with a
VEGAFLEX 67, you have to choose the menu item "Interface
measurement" as application. After the configuration of the
inputs, the exact DK value for the upper medium must be
entered. For further information see chapter "Application
examples".
Measured value indication/
Main menu
Device settings – Application
VEGAMET 625 - Double channel H art signal conditioning instrument 19
Setup with the integrated indicating and adjustment unit
28970-EN-050616