Operating instructions

Device-TAG
Device Name
à Enter the requested values via the appropriate keys and
save your settings with [OK].
For instruments with integrated Ethernet interface also a host
name and the IP address must Subnet Mask for integration in
the network must be entered. These specifications are
available from your network administrator. These settings are
only effective after a restart of VEGAMET 625.
LAN/Internet
IP address:
192.168.200.200
Subnet Mask:
255.255.255.0
Change?
à Enter the values via the appropriate keys and save your
settings with [OK]. Disconnect briefly the supply voltage so
that the modified settings become effective.
On instruments with integrated RS232/Ethernet interface, the
date and time can be entered in this menu item. These time
settings are buffered for approx. 3 days in case of power loss.
Time/Date
8:40
28.09.2004
à Enter the values via the appropriate keys and save your
settings with [OK].
Because VEGAMET 625 has two inputs, the measurement
loops must be assigned to the inputs. After the addresses of
the HART sensors are assigned, a list of the existing sensors
can be prepared and displayed via the sensor search. Now
you can assign the requested sensor to each measurement
loop.
VEGAMET 625 must be informed which "Sensor value" für die
Weiterverarbeitung verwendet werden soll. Je nach Sensortyp
kann dies Distanz, Druck, Trennschicht oder Temperatur sein.
Device settings – Host Name/
IP address
Device settings – Time/Date
Meas. loop - Input
VEGAMET 625 - Double channel H art signal conditioning instrument 21
Setup with the integrated indicating and adjustment unit
28970-EN-050616