Operating instructions

Meas. loop – Output – Relay
Device settings
▶ Measurement loops
Display
Diagnostics
Service
Info
Measurement loops
▶ Meas. loop 1
Meas. loop 2
Meas. loop 3
Adjustment
Damping
Linearization curve
Scaling
Meas. loop TAG
▶ Outputs
Outputs ①
▶ Relay outputs
Current outputs
Relay outputs ①
▶ Relay 1
Relay operating mode 1
Overfill protection
Relay switching points 1
Basic meas. value:
Percent
Relay switching points 1
Switch point ON:
0%
Switch point OFF:
100%
Relay failure mode 1
Switch state:
Off
Meas. loop – Outputs – Current outputs
Device settings
▶ Measurement loops
Display
Diagnostics
Service
Info
Measurement loops
▶ Meas. loop 1
Meas. loop 2
Meas. loop 3
Adjustment
Damping
Linearization curve
Scaling
Meas. loop TAG
▶ Outputs
Outputs ①
Relay outputs
▶ Current outputs
Current outputs ①
▶ Current output 1
Current output ①
Basic meas. value: %
▼
Output mode: 4-20mA ▼
Failure mode: 22mA ▼
Current output ①
▶ Basic meas. value
Output mode
Failure mode
Current output ①
▶ %
Lin%
VEGAMET 625 - Double channel H art signal conditioning instrument 33
Setup with the integrated indicating and adjustment unit
28970-EN-050616