Operating instructions

7 Setup with PACTware™

7.1 Connecting the PC

For temporary connection of the PC, e.g. for parameter

adjustment, the connection can be made via the interface

converter VEGACONNECT. The necessary I²C interface in the

front of VEGAMET 625 is available with all instrument

versions. On the computer, connection is made via the RS232

interface. If this is not available on your PC or already

occupied, it is also possible to use a USB – RS232 adapter (e.

g. article no. 2.26900).

VEGACONNECT 3

PACTware /

A-DT

Fig. 6: Connection via VEGACONNECT

1 RS232 interface of the PC

2 I²C adapter cable for VEGACONNECT 3 (article no. 2.27323)

3 VEGAMET 625

Via the RS232 interface, direct parameter adjustment and

measured value enquiry of the instrument can be carried out

via PACTware™. Use the RS232 modem connection cable

that is supplied with the instrument and an additionally

connected interlink cable (e.g. article no. LOG571.17347). To

reduce EMC interference, you should mount the supplied

ferrite bead on the RS232 modem connection cable.

If there is no RS232 interface on the PC or if the interface is

already occupied, it is also possible to use a USB – RS232

adapter (e.g. article no. 2.26900).

Connecting the PC via VEGA-

CONNECT

Connection of the PC via

RS232

VEGAMET 625 - Double channel H art signal conditioning instrument 37

Setup with PACTware™

28970-EN-050616