Operating instructions

In mode "Sampling pulse" an additional pulse is outputted after
adefined time. This means that a timer is started after each
pulse after which another pulse is outputted. This applies only
if already a pulse was outputted after exceeding the flow
volume.
Due to sludge at the bottom of the flume, it can happen that the
min. adjustment originally carried out can no longer be
reached. Therefore small quantities will continuously enter the
flow volume detection despite the "empty" flume. The option
"Min. flow volume suppression" offers the possibility to
suppress measured flow volumes below a certain percentage
value for the flow volume detection.
VEGAMET 625 - Double channel H art signal conditioning instrument 45
Application examples
28970-EN-050616