Operating instructions

38
7 Setup with PACTware
VEGAMET 625 • Double channel HART
28970-EN-150129
the latest instrument software from our homepage. A description of
the update procedure is also available in the Internet.
Further setup steps are described in the operating instructions
manual"DTM Collection/PACTware"attachedtoeachDTMCollec-
tion and which can also be downloaded from the Internet. A detailed
description is available in the online help of PACTware and the DTMs
aswellasinthesupplementaryinstructionsmanual"RS232/Ethernet
connection".
Information:
To access the connected sensors, the addressing must be already
carriedout,seechapter"Setup procedure - Set HART address".Ifthe
addressing should be carried out now via PACTware, then also only
one sensor must be connected.
To respond the instrument, the IP address or the Host name must be
known.Youcanndthisinformationunderthemenuitem"Device
settings".Iftheprojectsetupiscarriedoutwithoutassistant(oine
mode), IP address and subnet mask or the Host name must be
entered in the DTM. Click in the project window with the right mouse
keyontheEthernetDTMandchoose"Add. functions - Modify DTM
addresses".
All device DTMs are available as a free-of-charge standard version
and as a full version that must be purchased. In the standard version,
all functions for complete setup are already included. An assistant for
simpleprojectcongurationsimpliestheadjustmentconsiderably.
Saving/printing the project as well as import/export functions are also
part of the standard version.
In the full version there is also an extended print function for complete
project documentation as well as a save function for measured value
and echo curves. In addition, there is a tank calculation program as
well as a multiviewer for display and analysis of the saved measured
value and echo curves.
7.3 Setup web server/e-mail, remote enquiry
Setup and application examples of the web server, the e-mail func-
tionsandthevisualisationWEB-VVarespeciedinthesupplemen-
taryinstructions"RS232/Ethernet connection".
The connection via Modbus-TCP or ASCII protocol is described in the
supplementaryinstructionmanual"Modbus-TCP, ASCII protocol".
Both supplementary instruction manuals are included with every
instrument with RS232 or Ethernet interface.
Connection via Ethernet
Standard/Full version