Operating instructions

Maintenance
Feed/Feed-Back Units BUC 624, 625 47
Baumüller Nürnberg GmbH 5.96024.06a
7 MAINTENANCE
7.1 Maintenance information
This units are maintenance-free
Prohibition of unauthorized modifications
For safety reasons, unauthorized additions or modifications to the drive are not allowed.
WARNING
This equipment carries a dangerously high voltage and has dangerous rotating parts (fans). Ignoring
the safety and warning information may result in death, severe personal injury or damage to property.
You may only carry out maintenance and corrective maintenance work when the unit is deenergized.
Do not begin work on the power stage and the connections until you have made sure that the system
has been deenergized.
When dismounting safety equipment during commissioning, repair and maintenance work, you must
ensure that the machine is taken out of commission in accordance with applicable regulations. You
must remount and check safety equipment immediately after completing commissioning, repair and
maintenance work.
After carrying out any work involving intervention in the machine - regardless of whether this involves
the motor, the actual value acquisition or the power converter - the owner must carry out acceptance
testing of the machine and document it chronologically in the machine log. Failure to do this may result
in the owner being faced with consequences relating to liability legislation.