Operating instructions

Maintenance
Feed/Feed-Back Units BUC 624, 625 49
Baumüller Nürnberg GmbH 5.96024.06a
7.4 Disposal
For the most part, the equipment consists of the following components and materials:
For technical reasons, electronic components might need to contain dangerous materials.
If the components are used correctly, there is no danger to human beings or to the environment.
In case of fire, dangerous compounds may result or hazardous materials may be released.
Electronic components must not be opened, since beryllium oxide is used as internal insulation e.g. in
diverse semiconductors.
The beryllium dust set free when the components are opened, is dangerous to your health.
You must dispose of or recycle equipment or components according to national regulations as well as
any applicable local or regional ordinances.
Component Material
Various spacers, housing of current converter and unit
fan, etc.
Plastic
PCBs on which all the open- and closed-loop electron-
ics are mounted
Base material: Epoxy-resin fibreglass
woven material, copper-coated on both
sides and plated-through, various elec
-
tronic components such as condensors,
resistors, relays, semi-conductors, etc.