Specifications

xi
Illustrations
Illustrations
1 Instrument with LIF Detector,3
2 488 nm Laser Module Back Panel,5
3 LIF Optical System (Rotated 90° counterclockwise),7
4 Optical Diagram,8
5 Installing the Interconnect Module,10
6 Installing Filters in the Filter Housing,12
7 Installing the Filter housing into the LIF Detector,13
8 Installing the LIF Plug and Probe Stabilizer,15
9 Connecting the Probe to the LIF Cartridge,16
10 Main Menu,18
11 Configure Instrument menu command,19
12 Choosing the Type of Instrument,19
13 Confirmation,20
14 Choosing the LIF Detector,20
15 Configuring the LIF Detector,21
16 Direct Control Screen,22
17 Laser Control Screen,22
18 LIF Detector Initial Conditions Screen,23
19 Electropherograms (A, B) with different Dynamic Ranges,24
20 Accessing the LIF Calibration Wizard,27
21 Calibration Wizard – Step 1,28
22 Calibration Wizard – Step 2,29
23 Calibration Wizard – Step 3,30
24 Calibration Wizard Running Screen,31
25 Calibration Wizard – Step 4 Screen,31
26 Calibration Wizard – Manual Mode,32