Specifications

PN 718113AF
8
Laser Induced Fluorescence Detection
Installation
Figure 4 Optical Diagram
Installation
WARNING
Be sure to power down the instrument before proceeding with component
installation.
Preinstallation Requirements
Initial installation, which will be done by a Beckman Coulter Field Service Engineer, involves setting
up the laser, connecting it to the LIF Detector System, and verifying proper system operation
(including operation of the laser interlock system, which prevents the user from exposure to
laser light). The LIF Detector requires software and instrument firmware version 2.0 or later.
1. Collimated Collected Beam To Detector
2. Modified 5mm Dia. Sapphire lens
(R
1
and R
2
= 2.5 mm)
3. Cross Section of the Capillary
4. Spherical Reflector
5. Excitation Fiber for Laser #1
6. Excitation Fiber for Laser #2
7. Plug
8. Probe